"Neanderthals might have held out in isolated refuges for thousands of years longer than previously thought, a team of scientists reported in the Web site of the journal Nature on Wednesday."
Wednesday, September 13, 2006
Neanderthal News
"Neanderthals might have held out in isolated refuges for thousands of years longer than previously thought, a team of scientists reported in the Web site of the journal Nature on Wednesday."
Tuesday, September 12, 2006
Crab Grass
This was one mean blue crab. I guess you could say it was in a crabby mood. I suppose you'd be pretty irate too, if you were about to be dunked in a pot of boiling water.
Monday, September 11, 2006
Saturday, September 09, 2006
Lethargic Saturday
-------
This is Keaton Beach looking to the south-south west. Notice the plethora of sunbathing bikini clad women lined up shoulder to shoulder along the beach.
Here you see the pier where the fishing is best for the landlubbers without boats. There's lots of Grunts, Gar, and Ladyfish in these waters, but if you're persistent you can stock up Mullet, Grouper, and Mackerel. These waters are also filled with tons of Blue Crabs.
Now that we're at the end of the pier, standing under the covered gazebo, we sit back and breath a sigh of relief that we made it all the way to the end without being tossed over the side by those hordes of angry fisherman lining the railings.
Here's the beachfront looking north-west. It's hard to image how all those people playing in the surf can bear these overcrowded conditions. Be careful, there's sharks in the water!
This is really a high-falutin' place, it even has truck parking.

Time to go, I hope we can make it out before dark, it's going to be close what with the bumper to bumper traffic jam-packing the only access road in and out of town. All those skyscraper beachfront resorts really draw in the crowds.
Thursday, September 07, 2006
Cleaning and Storing Your Firearms
It’s also best to use a stainless-steel or coated one-piece cleaning rod such as those made by Dewey. Stainless is best, brass is mediocre, and aluminum is a poor choice. The softer the metal of the rod, the more chance there is of the metal holding bits of crud and acting like an abrasive and scratching the lands of the rifling, eventually destroying the accuracy of the barrel. One piece rods are best for strength, and also because multi-piece rods sometimes don’t line up properly making it that much more prone to contacting and damaging the barrel.
Start out by wetting a patch with solvent and swabbing the bore thoroughly to get it saturated, or use a foaming bore cleaner. Let it soak a few minutes and then take a bronze or stiff nylon bore brush and scrub the barrel about a dozen times in each direction. Your barrel will probably be very cruddy at this time. Instead of trying to patch out all the crud, take a paper-towel and ball it up so it fits into the bore very snuggly, and push it through with the cleaning rod, this should have pushed out most all of the big crud, leaving only hard-fouling to be removed. A BoreSnake can be used for this step instead, but don’t stop and call it quits after using the snake, be sure to continue with the rest of the cleaning steps to remove stubborn copper fouling.
At this point you’ll want to wet another patch with solvent and soak the barrel again for several minutes. Follow up with a dry patch. Repeat the solvent/dry-patch routine until the dry patches come out clean without any hint of dissolved fouling on them. You can tell if you are still getting copper fouling out of the barrel because you will see a blue or green tinge on the patch. I’ve found that one of the best all-around bore cleaners is Birchwood-Casey Bore Scrubber®. It does a fine job on powder, copper, and plastic shot-wad fouling. Lead fouling always takes some elbow-grease no matter what product you use, but Blue Wonder™ Gun Cleaner does a good job on everything, plus makes short work of carbon buildup. I generally try to save the Blue Wonder™ Gun Cleaner for the tough jobs, as it’s really some potent stuff and not really necessary for every day cleaning tasks, as it strips everything from the surface of the metal (and I have a hunch it softens a gun’s bluing too) and must be followed up with a thorough oiling afterwards to prevent rust; if you inadvertently miss a spot, leaving it dry and unprotected, you will know a short time later because you'll see a rust patch on that spot. That's the nice thing about most other bore solvents, is that they leave a slightly protective coating that will keep the metal from rusting for a short time, should you not thoroughly apply a rust-preventative.
Once the cleaning is done you can wipe down the bore and rest of the gun with a good coat of rust-preventative. I’m rather fond of either Corrosion-X or BoeShield T-9 for rust-prevention inside and out. Be sure to lubricate the actual moving parts of the firearm with the proper manufacturer recommended lubricants. (Normally oil is used on the slides, rails, etc. {although Corrosion-X claims superior lubricating qualities} and white lithium-grease on pressure points such as bolt lugs.)
When storing the guns, be sure to wipe them down with a fresh coat of rust-preventative at least once a month. If not being shot for extended periods of over 6 months, I generally give the whole gun a thorough cleaning and re-lube the gun every 6th month. Long-term/low-maintenance storage solutions for guns being stored over a year or more could include coating the gun with a good preservative such as Cosmoline, but can be difficult to remove later on. I have a feeling BoeShield would be excellent for long-term storage, but I have not yet tested it for such.
Be careful of the solvents you use, some will ruin the finish on wood stocks; others will destroy a synthetic stock in no time at all. A synthetic stock generally needs nothing rubbed on it, while it’s best to rub a wooden stock with a silicon cloth or use a carnauba wax. Avoid oiling the stock with gun-oil like the old-timer’s did, once the wood becomes saturated with so much oil, the wood will become soft and begin to break-down.
It’s best to store rifles or shotguns that have rubber or similar recoil pads in a horizontal position. The recoil pad can become deformed from the weight of the gun resting on it for extended periods of time. Of course this is not practical with current trend of gun-safes going around, so if you have to go with a vertical-storage safe instead of gun rack or cabinet with horizontal storage, try and opt for a safe that has provisions for barrel-down storage. Steer away from the cheap gun lockers with the foam padding, the foam attracts and holds moisture and will rust your guns quickly. Any time guns are stored in an enclosed area with little air-flow, humidity can become a concern. Lighted gun cabinets work well if the lights are left on inside it around the clock, as the heat from the bulbs will help to dry the air. Unlit gun-cabinets can easily have these added, or if you prefer, you can add a dehumidifier such as the electric GoldenRod dehumidifiers or use the re-usable Hydrosorbent Silica Gel packs that can be dried out in the oven numerous times.
Never store your guns with the barrel plugged, any moisture inside will not have a chance to escape or dry out and will eventually cause rust and pitting, and harmful fumes from solvents not thoroughly flushed out can also cause unwanted damage to the metal. This seems like common sense, but obviously it isn’t as I’ve seen more than a handful of people do exactly that. Also, never store your guns in a foam-padded gun case, again, the same as the cheap gun-lockers, the foam will attract and hold moisture causing your guns to rust. Yes, stainless steel guns will rust too, just at a slower rate (it’s stainless in the essence that it will stain-less, not be stain-proof).
Never store your guns with pressure on the firing pin springs as this will serve to weaken them over time. For guns with enclosed hammers, or hammerless guns, if allowed by the manufacturer dry fire the gun to release the spring tension, otherwise use snap-caps. I recommend the metal ones as they last longer than the plastic ones. My last set of plastic ones were Tipton 12-guage shotshell snap-caps and they both cracked after about the 6th use.
I hope that you've found some useful tips and suggestions that will serve to help keep your guns in excellent condition for as long as you own them.
Wednesday, September 06, 2006
How To Break-In a New Rifle Barrel
The purpose of breaking-in the new barrel is to try and squeeze every bit of accuracy potential out of the barrel. The break-in shots will help smooth the rough surfaces of the barrel, while the frequent cleaning will remove the fouling that fills in or builds up on the rough surfaces needing smoothed out, so that each shot will smooth out the barrel, instead of just building up excess fouling with each consecutive shot. A properly broken-in barrel will not only be more accurate, but will foul less and clean easier than a barrel that has not been properly broken-in
.
If it is a particularly rough barrel, one might consider first using one of the various barrel lapping kits from Brownells or Midway USA.
Give the gun a thorough cleaning before shooting it for the first time. This will remove any dirt, preservative, fouling from factory test shots, lapping compound not removed from the factory, etc.
Before shooting, run a dry patch down the bore to remove any oil or rust preventative.
It will take about 20 shots to break the bore in. Use only copper jacketed bullets for this procedure. Do not use any bullets with special coatings such as Moly, Lubalox, or other proprietary coatings, no matter if it's black, blue, green, purple, orange, polka-dot, houndstooth, or black-watch tartan.
For the first 10 shots, clean the bore with a good copper solvent between each shot. Allow the solvent to work for several minutes before swabbing the bore dry. Make sure you clean the barrel well enough each time that no traces of copper fouling are present.
For the next 10 shots, repeat the same procedure, except clean the bore every other shot.
Once all twenty shots have been fired, give the gun a thorough cleaning and now the rifle's barrel should be broken in and ready for duty.
Monday, September 04, 2006
Steve Irwin the Crocodile Hunter is Dead
I guess when you choose to do the things he does, it's bound to happen sooner than later. I suppose I shouldn't speak ill of the dead, but his motives were questionable. Perhaps this is justice for endangering the life of his one month old baby by carrying him into a pen of live crocodiles... you know, the biblical saying from Galatians 6:7 "Be not deceived; God is not mocked: for whatsoever a man soweth, that shall he also reap." Maybe I've taken that out of context, maybe not.
I didn't much agree with his anti-hunting doctrine either. I guess it just goes to show, even though he wanted to be the animal kingdom's best friend, the animal kingdom didn't feel quite the same way about him.
Sunday, September 03, 2006
More Criminal Control = Harsher Punishments
I've visited several of the prisons in this country, and I have to tell you, I was surprised at how good they had it. It's no wonder they didn't mind being prisoners, heck, if I fell on hard times, I wouldn't mind being a prisoner either in some of these prison-resorts.
Let's look at some of the things these criminals are being punished with:
A roof over their head.
A warm bed to sleep in every night.
3 full meals each day.
Hot showers daily.
Recreation facilities that in many cases are better equipped than public recreation centers.
Air-conditioned buildings in the summer.
Heated-buildings in the winter.
Cable T.V. is provided in many instances.
Medical and dental care.
High school diploma and college education programs.
How much do they have to pay for all this? Nothing, zero, zip, nada. They get it all for free at our, the taxpayers' expense. They don't have to go to work every day, they don't have to worry about paying the bills. They get it all handed to them just for being bad. Heck, in some ways they have it better off than about half of the working class stiffs do.
Many of these criminals are in prison their third, fourth, etc., times because they can't handle the responsibilities of the real world. They don't WANT to have to deal with the responsibilities of living in society. I've talked to numerous inmates that felt that way, but one will always be the most memorable.
My (now ex) step-daughter's biological father was released from prison several years ago. When he got out I did everything I could to lend him a hand to get him on his feet, he just didn't want to deal with it. All he'd talk about was trying to figure what kind of crime he could commit so he could go back to prison. I asked him, I said "Look, you just got released, why are you so intent on going back? Why don't you enjoy your new-found freedom for a while? Go straight, try and live a decent life." He wouldn't hear of it. He basically told me everything I've already told you. He couldn't handle the pressures of being free. He felt alone, and vulnerable in a big, open world. He didn't have guards protecting him every night, the excuses just went on and on. He couldn't handle the responsibility of working a real job, paying bills, or anything else. He wanted everything handed to him. In prison he didn't have a care in the world, never worried where his next meal would come from.
So a few days later he robbed a liquor store, took all the money, beat the owner nearly to death with a club, and walked down the road with a bottle of whiskey in his hand getting drunk until the cops picked him up a couple hours later. All so he could once again have all his needs taken care of for him.
As long as liberal lawmakers continue to oppress the free and look after the humanitarian treatment of criminals in this country, the problem is never going to be solved. We need harsher punishments for first time offenders. We need to take away all the comforts that these prisons offer. It would do wonders for reducing crime in this country if criminals had only harsh punishments to look forward to, instead of living on easy-street. Yeah, it's not so bad when your only worry is about getting shanked by a fellow inmate with a grudge. That's just one worry out of hundreds of others faced by living in society.
Get rid of the recreation facilities. Get rid of TV entertainment. Get rid of the educational opportunities (that one really gets me, all we're doing is producing smarter criminals). Make them get out in the hot sun and freezing cold 7 days a week for 14 or 16 hours a day doing hard manual labor. Take away their A/C and heat. Take away their padded bunks and give them a concrete floor to sleep on. Take away their nice meals and feed them dry dog food once a day. Get rid of the free medical and dental care; let them suffer, if they suffer in agony or die, too bad, they gave up their rights when they became criminals. Let them bathe once a month, and rot in their own filth the rest of the time.
If they committed a crime like murder, child molestation, etc. give them the death sentence. Don't give them a second chance to re-enter society so they can do it again. The same goes for multiple offenders of lesser crimes, if they've proven they can't reform, don't waste our tax dollars caring for them for the rest of their lives, give them the death sentence.
Harsh punishments like these will come a long way to making would-be criminals stop and think before they act. Yes, there will still be crime. There will still be crimes committed in the heat of the moment, and out of desperation, but I can guarantee there will be far less of them, and even less second offenders.
Quit treating those who defend themselves against criminals as if they themselves were criminals too. A man who has to take matters into his own hands to defend his family, life, home, and property should be praised and rewarded for the hero that he is, instead of being subjected to lengthily and unnecessary trials and investigations which rip apart his home and family life, as well as being scrutinized and condemned by the liberal media.
Compassion and humanitarian efforts are not for our country's criminals; save them for the needy and hungry citizens of this country who really need the help.
Saturday, September 02, 2006
Defending Against A Knife Attack
In several, if not most, states it's illegal to carry brass knuckles. It doesn't matter if you're the good guy or the bad guy, if you have brass knuckles on you in public then you are committing a crime whether you use them or not.
I personally don't want to have to get close enough to a knife-wielding wacko to get cut and stabbed trying to punch the guy out with a set of brass knuckles. Getting hacked up with a knife is one the last things I'd want to happen to me, and a gun will most assuredly allow me to neutralize the threat without risking getting seriously wounded or even killed.
So that leaves brass knuckles out of the reasonable defense against a knife category.
How about another knife? Let's cut to the chase here (pun intended). Any weapon or instrument that doesn't shoot a potentially lethal high velocity projectile, whether it be a knife, baton, club, brass knuckles, lead-glove, etc., will require you to get into the personal zone of the assailant. This puts you, the defender in serious jeopardy.
Anyone who's ever seen the results of a knife fight or knife attack knows just how serious and gruesome knife wounds are. They aren't like the little cuts you get when accidentally nick yourself in the kitchen slicing an onion. Knife wounds from an attacker are generally very deep, long slices or stabs that will open you up like nothing you can imagine, and there's a great chance it'll sever a major artery or otherwise slice open internal organs. You will bleed, and you will bleed out fast, and chances are you will die before help ever gets to you, that is if you even get the chance to call for it. And that's if you're the winner, folks.
No thanks, I choose life and walking away a healthy, living person. Thanks to right to carry laws in most states, we get the chance to defend ourselves with guns that can put the attacker down quickly and from a safe distance.
But just carrying a gun is not enough if you drop your guard. You've got to constantly be aware of your surroundings. You've got to quickly formulate defensive plans on the spur of the moment and adjust your plan as the environment changes around you. You need to be able to recognize potentially hostile persons and dangerous areas. Never walk into an area unless you have a quick escape route, avoid blind corners, dark alleys, and the like. Don't play the tough guy and try and walk right through the middle of a gang, swallow your pride and cross the street, or turn around and find another less hostile route. The list of do's and don't go on and on and there is a never ending list of variables being thrown into the mix.
Get some self-defense training, obtain your concealed carry license, and teach yourself to stay on alert whenever you venture out. Don't be a victim if you don't have to be, and before the crap hits the fan, remember that it's better to have and not need than to need and not have. Your life, health, and safety is your own responsibility, and no one else's, not even the government's.
Friday, September 01, 2006
The Man Behind "The McCarville Report Online"
If you've never visited Mike's blog before, now would be a good time to start. He's throwing away the political labels for this series and is giving you his politically unbiased opinion on the characters of the persons he'll be covering in his ten part series.
For those of you unfamiliar with Mike McCarville, I’ll try and give you a sense of who the man is.
Mike McCarville began writing at Del City High School as the Teen Correspondent for The Daily Oklahoman-Oklahoma City Times. After high school Mike spent part of his time in the U.S. Army’s PIO (Public Information Office) at Ft. Belvoir, Va., and also did a weekly radio show.
After being discharged from the Army, Mike enrolled at the University of Oklahoma and went to work in the Norman Bureau of The Daily Oklahoman-Oklahoma City Times, moving on to join the OKC staff in 1962.
From that time on, Mr. McCarville states that he bounced around from the Tulsa Tribune, Norman Transcript, and Oklahoma Courier, and then rejoined the Tribune in 1967 as State Capitol Correspondent.
In 1968 Mike became press secretary to Governor Dewey F. Bartlett. 1971 brought on a change to his becoming Assistant News Director at KWTV. In 1972 Mike co-managed Bartlett’s U.S. Senate campaign, ultimately becoming the Campaign Consultant.
1980 was a landmark year for Mike McCarville when he founded The McCarville Report, Byline Magazine for beginning writers, and Ford Owners Newsletter.
Mike went on to work part-time for KTOK News as Investigative Reporter. He became a full-time employee in 1993, began the talk show in 1996 and left the station December 31, 2005, having been on 10 years and 4 years as Program Director.
During all those years Mike explains that he did freelance writing for numerous publications which were national, regional, and local.
I asked Mike to recollect some of the most memorable moments of his career, and there were certainly some exciting, scary, and historic moments that he recounted: “The May 1999 F5 tornado...I was on the air. April 19, 1995, Murrah Building bombing...I was there within 10 minutes, spent almost three weeks on site nonstop. September 11, 2001...went on the air immediately. Lots of other moments as well: My interview with Jesse Jackson when, as my final question, I asked what he did for a living. "Well," he said, "I talk to people like you...have my CNN show...." He didn't know what to say. A moment I'll forever savor!”
When asked what prompted him to do his 10 part series entitled: "10 Political Figures I'd Want Watching My Back...And Why", Mike responded, “I was prompted to do this series because there are so many fine people in both parties out there that few know about; just my way of telling their stories based on my personal experiences with them.”
I asked Mr. McCarville, “With all the biased reporting floating around, how did you manage to keep your journalism so politically uncolored?” His reply was as refreshing as a spring breeze after the rain: “As for keeping bias out of my pieces...that's just the way I'm built, I guess. I strive to be fair and I've been around long enough, with enough experiences, that I recognize there are numerous sides to every story. I prefer to look at the positive sides.”
Mike has certainly led the way in well-balanced and unbiased journalism. His career has landed him a reputation for being one the few voices of truth in the chaotic and demanding world of journalistic media. No wonder the name Mike McCarville quickly became a well-revered household name throughout great state of Oklahoma.
Many thanks to Mr. McCarville for taking time out of his schedule to allow me to conduct this interview.
Christmas and the ACLU: W-W Style
This is coming early (really early) so that you can get ready to include an important address to your list.
Read on........ What a GREAT idea!Fun with the ACLU......Wanna have some fun this CHRISTMAS? Send the ACLU a CHRISTMAS CARD this year.
As they are working so very hard to get rid of the CHRISTMAS part of this holiday, we should all send them a nice, CHRISTIAN, card to brighten up their dark, sad, little world.
Make sure it says "Merry Christmas" on it.
Here's the Address, just don't be rude or crude. (It's Not the Christian Way, you know!)
ACLU
125 Broad Street
18th Floor
New York, NY 10004
Two tons of Christmas cards would freeze their operations because they wouldn't know if any were regular mail containing contributions. So spend 39 cents and tell the ACLU to leave Christmas alone. Also tell them that there is no such thing as a "Holiday Tree". . . . It's a Christmas Tree even in the fields!!
And pass this on to your email lists. We really want to communicate with the ACLU! They really DESERVE us!!
----
Okay, at first this might seem like a good idea. Everyone's saying, "Let's all send Christmas cards to the anti-Christian folks at the ACLU, that'll really show 'em!"
It'll show them all right. It'll show them what a bunch of morons people can be spending their hard earned money on none other but people they don't like. So the ACLU gets a bunch of mailbags full of Christmas cards. What are we going to really do to them? Inconvenience them for a few days? Whooptie-Doo.
Use a little logic and don't waste your money on a Christmas card to send to them, nor the cost of a stamp. With the price of the average Christmas card costing between $2 and $5, take the money spent on that one card, write out a check and send it to your favorite Christian-Rights organization that fights to keep your Christianity from being banned in this country. If everyone would do this instead, think of all the extra funding that would be used where it's REALLY needed.
I guarantee the money you give a Christian rights group is much more needed, and would be a bigger help in the long run, than that of wasting your money to cause a temporary inconvenience to ACLU by sending them a card.
Thursday, August 31, 2006
Should States seize guns amidst a crisis?
I leave you with a final thought: If criminals won't give up their guns, Why should we?
S&W Emergency Survival Kit Guns
I'm not fond of the neon grips and wish they'd include a black rubber combat grip too, though one can be purchased separately for a reasonable price. The revolvers are offered in your choice of .500 S&W and .460 XVR which is sure to please the most power-hungry handgun survivalists who like front-sight dents in their forehead.
Given the two choices, I would go with the .460 XVR as one has the option to load it with the blistering fast .460 XVR, the more than stout .454 Casull, or the .45 Colt cartridge. Still, I think the average handgunner will shy away from these powerhouse guns and opt for something a little more controllable nix the neon grips. I think an offering in .357 Magnum, .41 Magnum, or even the plenty-powerful .44 Magnum would have been a good idea.
Kudos to S&W for coming up with a unique package like this, even if they aren't offered for more user friendly cartridges that use ammo not requiring you to take out a second mortgage on your home to feed the beast.
Wednesday, August 30, 2006
Firearms Safety W-W Style
The 10 Commandments of Firearm Safety:
1. Always keep the muzzle pointed in a safe direction.
2. Firearms should be unloaded when not actually in use.
3. Don’t rely on your gun’s safety.
4. Be sure of your target and what’s beyond it.
5. Use correct ammunition.
6. If your gun fails to fire when the trigger is pulled, handle with care.
7. Always wear eye and ear protection when shooting.
8. Be sure the barrel is clear of obstructions before shooting.
9. Don’t alter or modify your gun, and have guns serviced regularly.
10. Learn the mechanical and handling characteristics of the firearm you are using.
Those are the ten basic (unadulterated) things you need to know before ever picking up a firearm. Now let’s break them down a tad and throw in some reasoning for each commandment.
The 10 Commandments of Firearm Safety Redux:
1. Always keep the muzzle pointed in a safe direction.
In other words, don’t point your gun at anything you don’t intend to shoot. Carry your gun with the muzzle pointed to ground in front of you. If you are in a group and someone is in front of you, sling the rifle with the muzzle skyward, but remember, what goes up must come down. In a house, bullets can penetrate interior walls and many exterior walls like a hot knife through butter, only you can’t see who’s on the other side. Logic dictates that there might not always be a safe direction, in this case choose a direction that has the littlest damage potential, but try and avoid those types of situations first.
2. Firearms should be unloaded when not actually in use.
That’s pretty self explanatory. The only exception is a gun kept loaded at all times for personal or home defense, but technically these are guns that are in-use 24/7.
3. Don’t rely on your gun’s safety.
Mechanical safeties can fail. A safety is not a fail-safe mechanism; it is a precautionary item that should not be relied upon solely as a means of preventing a firearm from going off. These safeties rely upon the competence of the person handling the firearm.
4. Be sure of your target and what’s beyond it.
Bullets penetrate, often times much further than anticipated. There is also the possibility you might miss your target, so never rely on the target itself as a backstop. Don’t shoot if people are anywhere in the vicinity of your target. Ever hear of a ricochet?
5. Use correct ammunition.
Again, this should be self-explanatory, but there are those who aren’t so bright. Just because it looks like it fits, doesn’t mean its safe. The wrong cartridge’s dimensions could be off enough from that of the chamber so that if it were to be fired, dangerous pressures could result. If it’s not a cartridge made specifically for your chambering, don’t even think about trying it!
A cartridge too small for the gun’s chambering could slide down far enough into the chamber that when you try to eject it, the extractor doesn’t grab it. A following round being shoved into the chamber could cause the tip of the bullet to ignite the primer of the first cartridge, resulting in a potentially lethal catastrophe.
In the case of shotguns, the round might just stop up the barrel and when the correct cartridge is loaded and fired, the results can be potentially lethal for both the shooter and any bystanders. (See #8)
6. If your gun fails to fire when the trigger is pulled, handle with care.
Hang fires can and do occur with modern ammunition, though it’s not nearly as common as it was with muzzleloaders. There could be a couple different reasons why it didn’t fire, and doesn’t mean it won’t fire at all. The primer could be slow to ignite. The powder could also be the culprit and be slow in igniting.
If your gun doesn’t fire, keep it pointed at the target and wait at least 15 seconds, and honestly, in all my years of shooting I’ve had a two factory rounds that didn’t go off until after 20 seconds passed (though these are extremely rare, more than one in a million if I had to hazard a guess), so best to wait at least 30 seconds, then if your gun has second fire capabilities, try firing again, or else extract the cartridge and inspect the primer to make sure it has a firing-pin dent.
Things to look for:
Make sure the face of the primer is flush with the head of the cartridge. If it’s seated too deeply, that could cause the firing pin to not hit it with enough force to fire it. The firing pin indentation should be round and deep, if it’s a very light indentation that could be a sign of a problem with the gun itself, it could be a broken firing pin or weakened spring. It could also mean a defective primer with too thick a housing.
If none of the above is the problem and one wants to investigate further, use a kinetic bullet puller and remove the bullet and powder. Is the powder dry? Try carefully decapping the cartridge case next. Go easy, decapping a live primer can break your decapping pin and scare the bejeebers out of you and anyone in close proximity. If it won’t decap, that’s probably the problem right there, the cartridge case had no flash hole in the primer pocket. If it does decap, then by golly it was probably just a dead primer.
7. Always wear eye and ear protection when shooting.
Again, fairly self explanatory, but there are some people who don’t quite understand what proper protection is. Regular eyeglasses are not protection enough, unless they have shatter-proof lenses.
Those Wally-World sunglass are the same. Unless they are shatter resistant lenses, specifically made for shooting or otherwise industrial safety glasses, don’t wear them. Glass lenses can shatter when debris hit them. Make sure the glasses fit your face snuggly and properly.
Use the proper hearing protection for your environment. At a range, wear hearing protection that attenuates loud noises and lets regular sound through so that you can hear range commands. Hearing protection is just important when hunting, though somewhat inconvenient. For those circumstances, try some of the hearing protectors that amplify (in stereo) surrounding sounds and attenuate the loud ones. These can actually help you hear game that you otherwise wouldn’t hear. Some guns require a little extra protection, those with muzzle-brakes can direct the sound-waves back towards the shooter, and in those cases sometimes earplugs with muff-type protectors over those are in order. Ultimately it’s your hearing, and it’s up to you how badly you want to keep it or not.
8. Be sure the barrel is clear of obstructions before shooting.
This one kind of goes along with #5 for obvious reasons, but there is more to it that that. Make sure that mud, snow, and other debris hasn’t inadvertently plugged the barrel. A piece of gaffer’s tape over the end of the barrel will help prevent this, and won’t affect the bullet or accuracy any.
If you shoot the gun and it sounds “off”, it could have been a squib round. Don’t load and fire another round until you check the barrel to make sure the bullet isn’t lodged in the rifling. If it is, don’t try shooting it out, this will be bad news for you and the gun. If you can’t remove the bullet with a dowel or sturdy rod, it’s time to let the gunsmith take care of it for you. Now would be good time to have him check the whole gun over as a safety precaution. Now would also be a good time to fork over a few bucks to have him do a good trigger/action job if you haven’t had one yet.
A special note aimed at one person: To the guy who called in to Cam & Company a few weeks ago and asked what to do if you got your pecker stuck in the barrel of a shotgun, my advice to you is load the shotgun with a pumpkin ball and pull the trigger. Everyone else is advised to not do this, as it will only work for this particular person with the tiny genitalia.
9. Don’t alter or modify your gun, and have guns serviced regularly.
They’re talking about major modifications. Changing the grips, stock, or sights on a gun can probably be achieved by any gun owner unless they are completely incompetent, but this level of incompetence would have probably kept them from finding a gun shop in the first place. As for major modifications, action jobs, etc., those are best left to professional gunsmiths with outstanding reputations.
10. Learn the mechanical and handling characteristics of the firearm you are using.
Every gun is different, and has a personality of its own. Read the manual, if you didn’t get a manual contact the manufacturer and they will gladly send you one for free. Don’t go to the range and shoot the gun a few times and then never touch it until you need it. You need to familiarize yourself with the gun, go to range and practice, practice, practice. Use the firearm often enough so that all of its features and handling nuances become second nature to you.
Now for some W-W extras:
11. Don’t mix firearms and alcohol.
These activities should be enjoyed separately and should never be mixed under any circumstances.
12. Don’t ban your children altogether from your guns.
Children are curious by nature and banning them from your guns will only intensify their curiosity. Instead, teach them gun safety, teach them the importance of all the rules and the responsibility that goes with owning and using firearms. Then let them handle the guns under your supervision and teach them to shoot. Take them with you often to the range, and hunting, and let them shoot with you.
Buy a few guns specifically for their use that you will keep safe with your own, this will make a world of difference in their lives, they will then be their own responsible gun owner, and they now have to practice what they’ve been taught. It’s one thing to shoot daddy’s guns; it’s another to shoot their own guns that are specifically for them. Teach them to clean and maintain their own guns too.
13. Clean and lubricate your guns as soon as possible after each shooting session.
A clean, well maintained gun is a more accurate and reliable gun. Today’s non-corrosive rounds still leave a residue that can attract moisture which will cause rust and pitting in your bore.
14. Buy more guns.
I don’t care how many guns you own, it’s never enough. A happy gun is a gun with a responsible owner with lots of family members. Think of all the poor orphaned and ownerless guns at the gun shop that are in need of loving owners.
15. Hunters: One Shot, One Kill
Law Abiding Gun Owners/Hunters/Sportsman and the term "spray and pray" should never be used in the same sentence. Learn how to shoot accurately and kill the animal with one shot. Learn how to hunt and shoot properly, never take potluck shots and hope they hit, that's the among the worst kind of irresponsibility.
16.Last, but certainly not least: Support the National Rifle Association.
For around the price of a box of premium rifle ammo, you can get a year’s membership to the NRA who continues to defend your rights as gun owners. They are out there defending your rights whether you asked them to or not, so why not suck it up and show a little thanks for their efforts and give them the support they need in return. http://nra.org
